Need Reliable Sump Plum Repair or Installation in Omaha?

home plumber service

When you need sump pump repair in Omaha, NE Call American Rooter at 402-934-7444 for fast reliable to service to protect your home’s basement.

Sump pumps help guard against water building up in your basement or lower level of the home. It is not enough to simply have a sump pump but, the pumps need to have regular maintenance to avoid unexpected water damage.

American Rooter Plumbing Omaha, NE offers the following Sump Pump Services:

    • Installation
    • Repair
    • Maintenance
    • Sump Pit Setup
    • Battery Backup System

It is important that your sump pump is appropriately sized and installed properly so that it can manage any kind of excessive rainfall or water build up that comes it’s way. American Rooter will ensure that your pump is installed and properly sized to handle the job.

sump pump diagram



If you have a sump pump that has always worked, you most likely do not value it as much as you should. heavy thunderstorms are not only common however anticipated. Throughout thunderstorms, high winds and lightning tend to knock out power. Unfortunately, sump pumps do not work without electrical power. The backup sump pump safeguards against loss of power, main pump failure, excessive water inflow and float switch failures.


Normal suggestions suggest taking a look at equipment every year. Pumps running often due to the greater water table, water drainage, or weather conditions ought to be examined more frequently. Sump pumps, being mechanical devices, will fail ultimately, which might lead to a flooded basement and pricey repairs. Redundancy in the system (multiple/secondary pumps) can assist to avoid problems when repair and maintenance are required on the primary system.

When taking a look at a sump pump and cleaning it, dirt, gravel, sand, and other debris must be eliminated to increase efficiency and extend the life of the pump. These obstructions can also decrease the pump’s ability to drain the sump and can enable the sump to overflow. The check valve can also jam from the particles. Analyze the discharge line opening, when suitable, to make sure there are no blockages in the line. Even a partly obstructed discharge line can require a sump pump to work more difficult and increase its chance of overheating and failure.

Float switches are used to automatically turn the sump pump on when filled to a pre-programmed level. Drift switches must be clear of any blockages within the tank. A float guard can be utilized to prevent the float switch from accidentally resting on the real estate, and remaining on.